Creabest from Bostik' Bronze Ceramic Adhesive: This harikaür be supplemented with a variety of environmentally friendly chemical additives and polymers manufactured according to TS EN 12004, Class C1, ceramics, tiles, mosaic and so on. used to paste the floor coating materials, water and moisture no3 resistant, cement-based adhesive. creabest Bronze Ceramic Adhesive Application areas: Indoors, floors. Features: It is durable and long lasting. Plastic consistency, easy to apply. Public Works Item No: 04 013/1 Technical data: Color Grey Dry Unit Weight (kg / L) was 1.5 0.2 Wet Bulk Density (kg / L) was 1.7 0.2 in the container no3 Standby Time (minutes ) 60-100 study (minutes) 15-20 Drying Time (hour) ~ 24 Adhesion Strength (28 days) (N / mm 2)> 0.5 Mixture Water Amount (for 25 kg of dry mortar) from 6.0 to 7 0 l Application temperature + 5 C to + 35 C hardened resistance of the coating - 25 C to + 80 C Technical Information, + 20 C air temperature and 50% obtained by the relative humidity no3 of about are data. Preparing: In all applications, the General Building Construction Rules and Technical no3 Implementation Specification should be considered. Dust, dirt, mold oil, slag, etc. adhesive preventive foreign substances such as paint, no3 cement residues and wastes, such as plaster and concrete should be removed from the surface. Cracked plaster, sub-surfaces that are not strong enough to carry themselves as poor surfaces no3 or algae residues should be removed. The floors which require repair before the adhesive is applied at least 3 - 4 days be filled with special repair and filling mortar and should be leveled. no3 concrete and concrete, such as anhydrous liquid absorption is recommended for use in high surface lining. Application: Bronze Powder form CeraBest Tile Adhesive, no3 clean, and into a container filled with water at normal ambient temperature should be poured in until a uniform mixture is obtained is mixed in a low speed mixer. The mixture while. 5 min. must be. 3 min The mixture obtained at the end of the operation. rested for 2 min. should be stirred until homogeneous. The mortar is spread on the surface with a notched trowel with proper tooth size. roofing materials on the combed mortar (ceramic, tiles, etc) 15 min. in glued. If this time is exceeded, the mortar should be discarded scraped from the plates and must apply fresh mortar. By controlling the flatness of the surface finishing materials tokmaklanarak rubber mallet, and to adhere firmly settlement. for caulking should wait at least 24 hours. no3 After application: Fresh glued coated surfaces should be protected against direct sunlight, strong air stream, high air temperature (+ 35 C), must be protected against adverse weather effects such as rain and frost. Consumption: Approximately 1,5 - 3,0 kg / m2. Coverage amounts are theoretical values, we recommend that consumption controlled sample application before treatment. Packing: 25 kg foil is available in kraft paper bags Safety Precautions: General construction rules and safety measures in accordance with the time of application, defined in the General Considerations Security (S) and risk (R) Observe the rules. Bostik at the most advantageous price of this product Dealer Çorlu West Limited in the find. This product can not be ordered through the web address www.batilimited.co.
Monday, January 12, 2015
Creabest from Bostik
Creabest from Bostik' Bronze Ceramic Adhesive: This harikaür be supplemented with a variety of environmentally friendly chemical additives and polymers manufactured according to TS EN 12004, Class C1, ceramics, tiles, mosaic and so on. used to paste the floor coating materials, water and moisture no3 resistant, cement-based adhesive. creabest Bronze Ceramic Adhesive Application areas: Indoors, floors. Features: It is durable and long lasting. Plastic consistency, easy to apply. Public Works Item No: 04 013/1 Technical data: Color Grey Dry Unit Weight (kg / L) was 1.5 0.2 Wet Bulk Density (kg / L) was 1.7 0.2 in the container no3 Standby Time (minutes ) 60-100 study (minutes) 15-20 Drying Time (hour) ~ 24 Adhesion Strength (28 days) (N / mm 2)> 0.5 Mixture Water Amount (for 25 kg of dry mortar) from 6.0 to 7 0 l Application temperature + 5 C to + 35 C hardened resistance of the coating - 25 C to + 80 C Technical Information, + 20 C air temperature and 50% obtained by the relative humidity no3 of about are data. Preparing: In all applications, the General Building Construction Rules and Technical no3 Implementation Specification should be considered. Dust, dirt, mold oil, slag, etc. adhesive preventive foreign substances such as paint, no3 cement residues and wastes, such as plaster and concrete should be removed from the surface. Cracked plaster, sub-surfaces that are not strong enough to carry themselves as poor surfaces no3 or algae residues should be removed. The floors which require repair before the adhesive is applied at least 3 - 4 days be filled with special repair and filling mortar and should be leveled. no3 concrete and concrete, such as anhydrous liquid absorption is recommended for use in high surface lining. Application: Bronze Powder form CeraBest Tile Adhesive, no3 clean, and into a container filled with water at normal ambient temperature should be poured in until a uniform mixture is obtained is mixed in a low speed mixer. The mixture while. 5 min. must be. 3 min The mixture obtained at the end of the operation. rested for 2 min. should be stirred until homogeneous. The mortar is spread on the surface with a notched trowel with proper tooth size. roofing materials on the combed mortar (ceramic, tiles, etc) 15 min. in glued. If this time is exceeded, the mortar should be discarded scraped from the plates and must apply fresh mortar. By controlling the flatness of the surface finishing materials tokmaklanarak rubber mallet, and to adhere firmly settlement. for caulking should wait at least 24 hours. no3 After application: Fresh glued coated surfaces should be protected against direct sunlight, strong air stream, high air temperature (+ 35 C), must be protected against adverse weather effects such as rain and frost. Consumption: Approximately 1,5 - 3,0 kg / m2. Coverage amounts are theoretical values, we recommend that consumption controlled sample application before treatment. Packing: 25 kg foil is available in kraft paper bags Safety Precautions: General construction rules and safety measures in accordance with the time of application, defined in the General Considerations Security (S) and risk (R) Observe the rules. Bostik at the most advantageous price of this product Dealer Çorlu West Limited in the find. This product can not be ordered through the web address www.batilimited.co.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment